Now Able to Text Our Store at (248) 634-8951!

Simpson H3 Hurricane Tie

Simpson Strong-Tie

The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left- and right-hand models and can be installed in pairs.


Key Features

  • Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces
  • Approved for installation with load-rated Strong-Drive® SD Connector screws
  • Use also for a variety of connections where one member crosses another


Material

  • 18 ga.


Finish

  • Galvanized (G90), stainless steel or ZMAX® coating; see Corrosion Information


Installation

  • Use all specified fasteners; see General Notes.
  • Shipped in equal quantities of right and left versions.
  • Hurricane ties do not replace solid blocking.
  • When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.

We Also Recommend

Nelson Wood Shims WC8/12/32/78L Lined Composite Bundle 8 Inch Composite Shims
Nelson Wood Shims

Nelson Wood Shims WC8/12/32/78L Lined Composite Bundle 8 Inch Composite Shims
Simpson Strong-Tie HGUS® Heavy Girder Hanger with Double-Shear Nailing
Simpson Strong-Tie

Simpson Strong-Tie HGUS® Heavy Girder Hanger with Double-Shear Nailing
Simpson Strong IUS I-Joist Hybrid Hanger with Snap-In Feature
Simpson Strong-Tie

Simpson Strong IUS I-Joist Hybrid Hanger with Snap-In Feature
Simpson Strong-Tie SUR/SUL Right- or Left-Skewed U-Shaped Hanger
Simpson Strong-Tie

Simpson Strong-Tie SUR/SUL Right- or Left-Skewed U-Shaped Hanger
Isomax Dowel Plug, Flat Head, Oak, 1-In., 5-Pk.
Eazypower

Isomax Dowel Plug, Flat Head, Oak, 1-In., 5-Pk.